只需一步,快速开始

QQ登录

只需一步,快速开始

微信登录

微信扫码,快速开始

登录 | 加入联盟 | 找回密码 |



 找回密码
 加入联盟

只需一步,快速开始

QQ登录

只需一步,快速开始

微信登录

微信扫码,快速开始

查看: 758|回复: 1

ProSimA320 version 1.16

[复制链接]
发表于 2018-11-8 23:23:25 | 显示全部楼层 |阅读模式
October 26 2018 Release version 1.16
====================================
FMS:
- Added support for along track waypoints
- Added MCDU support for time markers
- Added support for block type altitude constraint
- PFD target alt should not show runway threshold alt during RNAV approach
- Fixed aircraft not descending when pushing FCU ALT during cruise
- VNAV descend fixes
- Managed descend should ignore FCU ALT when FINAL APP armed
- Fixed DIR to FROM point creates discontinuity
- Added FMS Engine Out mode
- Do not activate go around mode when levers moved into TOGA during engine failure at FLX takeoff
- Fixed FMS managed speed mode during engine failure in NAV mode
- Fix situation where managed vertical mode is armed when no managed vertical mode is active

Systems:
- Added fuel over/under temperature failures
- Added hung start
- Fixed ground steering issues with nosewheel steering disabled
- Switch only outer DU between PFD/ND with XFER switch when ECAM switching state is not in normal position
- Fixed fuel cross feed ECAM memo
- Added fire indication due to loop failure
- ECAM ignition message should not appear when engine anti ice switch is on

Displays:
- Fixes to ECAM pages
- Updates size of fixes in ND
- Added N1limit in upper ECAM
- Added amber EGT limit in upper ECAM
- Tuned ECAM ELEC page
- Added Metric alt to lower ECAM
- Fix Direct2D performance degradation after running for several hours
- Reduced size of DME symbol in ND
- Tuned ECAM visuals for FCTL
- Chrono indication on ND should be white
- Fixed DME only stations not shown with EFIS VOR button
- Fixed ND not showing CSTR on waypoints when CSTR function is on and lateral mode is not managed
- Improvement in ND descend marker during selected modes

Hardware:
- Added missing ACP switches and ACP3 for Poldragonet hardware
- Added reading light support for Poldragonet hardware
- Added support for Poldragonet sidestick and tiller hardware
- Fixed Poldragonet XPDR does not show test pattern during light test

CDU:
- Added MCDU ETT function
- Fixes to font size in MCDU FPLN page
- Added MCDU PROG REPORT page
- Upgraded SELECTED NAVAIDS MCDU page

Misc:
- Fix issue with intercom latency increasing over time
- Improved failure naming
Martin Vsetecka
ProSim Support
发表于 2019-8-21 10:39:40 | 显示全部楼层
这个可以啊!!!!!!!!!!!!

发表回复

您需要登录后才可以回帖 登录 | 加入联盟

本版积分规则

关注我们:微信公众平台

服务号

订阅号

Discuz! Copyright   ©2014-2020  飞行者联盟  ( 吉ICP备19002044号-2 )