ProSim737 version 2.27
Mar 26 2020 Release Version 2.27======================================
System:
- Fixed EEC indicators Logic
Note: Indicators are mechanical and will show the ON legend when latched. They will only illuminate when XFR2 is active
Displays:
- Fixed small text misalignment on EFIS MODE
- Fixed take off speed option not working properly on PFD/EFIS Airspeed indicator
CDU:
- Fixed delay when starting ProSim CDU before ProSim Systems
- QRH speeds on TAKE OFF page should be visible after selection
Drivers:
- Fixed startup crash when circuit breaker driver is enabled
- Fixed circuit breaker tree node not showing panel info
- Fixed dual implementation of drivers
- Fixed XPDR value
- Fixed transponder frequency mapping
- Added option to use USB PnP modules as FO when only one module is detected
Note: When only one module is found of an USB VHF, NAV, ADF, ASP, CDU or Chrono it is now possible to make it work as a FO module
- Fixed CDU indicators not working
- Added ICS Overhead
- Fixed MULTIRADIOs detection
- Fixed MCP PRO V1 reset
- Fixed crash when MCP IP configured but MCP not connected
- Fixed CDU brightness not working when 2 CDUs are present
- Fixed MCP reset (Ethernet) when already initialized
- Fixed 833 not initializing when starting
- Fixed ADF not sync when starting
- Fixed rudder trim gauge showing -10 when value is 0
- Improved initial sync logic
- Fixed mixed EFIS MINS and BARO
- Fixed mixed EFIS MINS and BARO
- Added connection info to ethernet modules
- Fixed FO CDU inputs not working
- Fixed blank MCP speed window
- Added support for the CDU PRO
- Added missing inputs on legacy ASP
- Fixed TRIM PRO not properly implemented
- Fixed 833 not working properly
- Fixed VHF PRO not implemented properly
- Fixed NAV PRO not implemented properly
- Fixed MULTI_RADIO PRO not implemented properly
- Fixed Ethernet modules not saving port number
- Fixed mixed CDU inputs
- Fixed mixed EFIS inputs
- Fixed mixed ASP inputs/outputs
- Fixed legacy ASP not implemented correctly
- Added option to use legacy ASP as FO ASP
- Improved flow control when MIP and Pedestal are detected
- Fixed EFIS CTR and TFC not working
- CDU brightness analog will now start with 255 to prevent dull screens in case hardware does not send the initial value
- Fixed Wxr radar mode not working
- Fixed communication issue with some radios
- MIP brightness analog will now start with 255 to prevent dull screens in case hardware does not send the initial value
- Fixed EFIS BARO not working properly
- Added EFIS EL option.
Note: It will make the EFIS BARO and MINIMUMS to be handled as encoders and not selectors like the newer EFIS PRO.
- Implemented acceleration for EFIS BARO and MINS (non EFIS EL option)
- Fixed COM port reverting to the default one
- Added delay option
- Fixed analog input mishandling on MIP panels
- Removed send gauge data option
- Fixed EFIS BARO and MINS not working
- New CPFlightV2 driver
Note: It is required to disable any other CPFlight driver if enabled. It does not afXXXt the overhead driver.
Misc:
- Fixed WebCDU not working mark:loveliness::loveliness:
页:
[1]