ProSimB738 version 3.02
Jan 07 2021 Release Version 3.02======================================
System:
- Fixed along track waypoints when no active route
- Fixed isa dev/qnh data entry parser
- Fixed VECTOR leg handling
- Fixed leg direction
- Fixed CDU crash when ARR/DEP avail but no legs yet
- Fixed CDU crash
- Fixed 1st waypoint distance
- Fixed non active route not showing direction and distance
- Improved VECTOR leg handling
- Fixed climb speed not reset after passing speed limit altitude
- Fixed rnp mode toggling between terminal and approach in certain conditions
- Fixed scale changing to ILS type as soon as ILS is tuned
- Fixed single waypoint parser
- Fixed INTC course when leg is entered at top
- Added RTA functionality
- Improved data entry parser
- Fixed formatting when fuel is invalid
- Fixed DTG for next/after waypoints showing same value
- Fixed target speed not showing XXX/MCP if speed intervention active
- Manual brake input increased to 5% to prevent spurious system disarm
- Reworked system (due to future FS2020 compatibility)
- Fixed thrust mode during take off
- Fixed SPEED mode not working properly when selected
- Split AoA signal
Displays:
- Improved waypoint drawing (if same waypoint is present twice in route, just one will be drawing to prevent double drawing effect)
- Added Pitch and Roll flags
- Improved ATT flag
- Added AOA flag
- Fixed Start Valve Open blinking for more than 10 seconds if valve remains open
Drivers:
- Implement SIDE module if MIPICS is detected
- Fixed some parsing error 谢谢楼主，看到了！！！！！！ 牛皮;P;P;P;P我也去看看，希望不是整合驾驶舱那种
页:
[1]