查看: 3161|回复: 18

QW787 发布 1.02 hotfix 补丁

[复制链接]
已绑定手机
发表于 2017-11-15 00:33:58 | 显示全部楼层 |阅读模式
After you download, simply run the EXE and the purchase screen will appear. Please note that it is not uncommon for e-commerce enabled files or large downloads to be flagged with a false-positive by some virus scanners during download or installation.

Important: If you have a previous version installed (pre 13th November 2017), it is very important you download the 1.02 hotfix here. The version below already contains Hotfix 2 and does not need to be updated.

发表于 2017-11-15 04:30:53 | 显示全部楼层
谢谢你是最好的
已绑定手机
发表于 2017-11-15 07:53:51 | 显示全部楼层
这么快又出补丁了。。。
已绑定手机
发表于 2017-11-15 08:03:18 | 显示全部楼层
那你就去更新吧..........
已绑定手机
发表于 2017-11-15 08:11:17 | 显示全部楼层
等新版本出来下个玩玩
已绑定手机
发表于 2017-11-15 08:13:59 | 显示全部楼层
要重新激活嗎?QW787 发布 1.02 hotfix 补丁-1682 QW787 发布 1.02 hotfix 补丁-4125 QW787 发布 1.02 hotfix 补丁-4983
已绑定手机
发表于 2017-11-15 10:40:55 | 显示全部楼层
這是更新項目,是FSX最後更新,接著準備進入P3D V4開發!!
Version 1.0.2 (released 11-12-2017)
Fixes:
– Random CTDs while weather radar is operating
– CTD when loading panelstate after loading saved flight
– Problems maintaining altitude when using FSUIPC
– A/T Speed mode is unable to hold airspeed at very high cruise altitudes
– Mach number cannot be changed in certain scenarios
– FLCH engagement selected speed logic
– Autopilot initially turns into opposite direction upon localizer capture
– ILS: frequency autotuning
– ILS: Runway course gets tuned even if localizer not intercepted yet
– ILS: unable to capture at high intercept angles
– Pressurization: Cabin alt descends below airport elevation at high altitude airports
– Fuel: center tank scavenge system
– Fuel flow and fuel tank quantity not afXXXted by KGS option
– Arming spoilers using joystick axis
– FSUIPC assigned flap axis is reversed
– Inboard spoilers remain slightly extended after go around
– PFD/ND: Text overlaps
– PFD: 3rd airspeed digit cutoff in compact mode
– ND: Unable to exit PICK WPT mode on FO ND MAP
– ND: FIX/ETOPS range ring not showing when waypoint is out of map range
– ND: ETOPS line style changed
– ND: Button highlight boxes not showing on full ND mode
– ND: Map scale incorrect in full plan mode
– ND: Airport map not displayed correctly for highly complex airports
– ND: Airport map display misaligned in crosswind
– ND: wide FO side menu clickspot does not cover entry select box (only the diamond)
– 2D DU popups cannot be closed by clicking the light sensor
– CDU: VNAV CRZ Page LSK 6L typo
– CDU: FIX page radial only option
– CDU: FIX page maximum distance increased
– CDU: setting cruise IAS manually does not afXXXt airspeed
– CDU: Mouse highlight not working on FIX page
– CDU: Help message not matching selected weight unit
– CDU: RTE page CO route cut off
– TCP: frequency tuning
– EFB: CTD when pressing PGDN button
– EFB: Departure chart clip page only shows page 1/1
– EFB: XFR button not working on 2D popup
– FS Setting: incompatibility with “true airspeed” FS speed setting
– FS Setting: incompatibility with “metric” FS altitude setting
– QW Dispatcher: unable to find FSX Steam path
– QW Dispatcher: changing units does not afXXXt aircraft
– QW Dispatcher: Bulk Cargo weight issues
– QWCAS Sound improvements
Additions:
– Flight Controls using keyboard arrow keys
– Autopilot disconnect and warning sound cancel using key command
– EFB: invalid autobrake settings highlighted in yellow
– EICAS: ‘COMM’ memo when new COMM message received
发表于 2017-11-15 15:20:14 | 显示全部楼层
期待P3Dv4版本的,不过说实在的,这787的气动性很不好,非常不好控制,下高时常常都是减速板长期开着,而且还经常超速,每次都会超出下高距离,而且巡航中速度还必须手动控制,不然长期超速。
发表于 2017-11-15 15:37:37 | 显示全部楼层
maisanlun 发表于 2017-11-15 15:20
期待P3Dv4版本的,不过说实在的,这787的气动性很不好,非常不好控制,下高时常常都是减速板长期开着,而且 ...

气动是一般,只是现在787机模没别的选择,只能说有总比没有好。
发表于 2017-11-15 15:43:08 | 显示全部楼层
csf1209 发表于 2017-11-15 15:37
气动是一般,只是现在787机模没别的选择,只能说有总比没有好。

确实如此,自带的电子飞行包还没有研究明白,感觉挺有意思的。
已绑定手机
已实名认证
发表于 2017-11-16 17:34:22 | 显示全部楼层
谁能教我怎样装87啊?各位老哥。装好了后按钮有用。发动机启动着。油门推杆在百分之百。就是所有仪表黑着打不开。是不是没和谐好啊?
已绑定手机
发表于 2017-11-16 20:55:21 | 显示全部楼层
QW的787需要更新的地方实在是太多了!还是先玩747
已绑定手机
发表于 2017-11-16 21:37:47 | 显示全部楼层
更新点什么内容
发表于 2017-11-18 20:13:27 | 显示全部楼层
期待 for P3D V4 的版本快推出
已绑定手机
发表于 2017-11-19 16:33:37 | 显示全部楼层

我也不清楚 再找找吧
发表于 2017-11-19 17:24:36 | 显示全部楼层
都是英文 我去翻译一下。。
您需要登录后才可以回帖 登录 | 加入联盟

本版积分规则

快速回复 返回顶部 返回列表