- UID
- 4269
- 注册时间
- 2014-3-13
- 在线时间
- 小时
- 最后登录
- 1970-1-1
- 精华
- 阅读权限
- 80
- 听众
- 收听
 已绑定手机
|
作为一只水獭忠实粉，你怎能错过AS家双水獭最新的Hotfix1-4补丁呢
FSX: http://forum.aerosoft.com/index.php?app=core&module=attach§ion=attach&attach_id=63830
P3D: http://forum.aerosoft.com/index.php?app=core&module=attach§ion=attach&attach_id=63829
更新内容自行翻译吧
Updated 2015-04-15 !!!
This is a complete set of corrections including Hotfix 1, 2,3 & 4, to be applied on Twin Otter Extended Version 1.11.
Hotfix 1 took care of the runaway elevator trim when disengaging the autopilot.
Hotfix 2 changed the Autopilot Go-Around (GA) mode logic.
Hotfix 3 solves the problem with the ADF not being able to be set to .5 Khz.
Hotfix 4 fixes a problem with the electrical logic for the fuel boost pumps.
The real Bendix King KR 87 TSO does not have any decimal settings, thus this cannot be set.
In reallife though, the ADF radio is able to pickup frequencies, even if the exact frequency isn't set, just like when You tune Your FM radio, reception is still possible, though a bit distorted, when You get near the exact frequency.
In FSX the frequency must be set exactly to the correct frequency to work.
Hotfix 3 will make the ADF scan between the set frequency - f.ex 341 i.e 341.0 and 341.5 and then lock to the frequency where it receives a signal.
This means that if Your naviagtion chart tells You that the NDB You like to tune is at 341.5, then simply set the ADF frequency to 341 and the ADF will then toggle between 341.0 and 341.5 with an interval of 5 seconds. If the ADF then picks up a signal on 341.5, then it will stay there and stop toggling.
This is very much the same function as can be set via FSUIPC. |
|
雷达卡
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
千斤顶
照妖镜
