October 30 Release version 1.41
===============================
FMS:
- New FMS fuel prediction model to increase reliability of fuel calculations
Flight:
- Improved alternate law pitch control and low speed stability
Systems:
- Increased size of fanair heat exchanger to increase bleed air lo temp failure effectiveness
- Set powersource of fuel pump indicators to AC essential
- Improvement to logic for FUEL CONSUMPT INCRSD ECAM message
- Fixed secondary ECAM failure AIR COND label and fixed issue where it called up a blank screen
- Added Secondary F/CTL failure
- Fixed ACP 3 connected to wrong bus
- Allow zone controller to work when AC power available
- Static port will now issue failure when not powered
- Cab fans will now issue failure when not powered
- Fixed vent extract fan connected to dc essential bus instead of dc essential shed bus
- Fixed Galley fan CTL power connected to wrong bus
- Fixed crew oxygen valve to remain in current position when power is lost
Hardware:
- Added support for FScockpit MCDU brightness keys
Misc:
- Added gates for AC power up (any AC source), AC power down and ground power connect
- Switched CB logic to trigger software CB software failure in IOS whenever CB gets pulled