IXEG1.1两天内发布
大家期待IXEG 733 V1.1很久了吧。就在2个小时前，官方放出消息了，说在接下来的48小时内就发布出来了。原贴地址在这里：http://forums.x-pilot.com/for...-737-classic-v11-is-landing/说实话很想支持一下正版，毕竟XP品台优秀的机模不多。可是目前没有这个经济实力，所以只好期待凤大显神威了。
本帖最后由 BaiCaiX 于 2017-5-28 23:40 编辑
可以入手了，之前 IXEG 说过，盗版太多了，可能不会开发后续插件了。
希望有能力的还是支持一下，不要让用心做事情的人寒心。最终伤害的还是玩家自己。
那你就支持正版呗 我是正版的IXEG。。。期待48小时后的更新！
Captains,
Within the next 48 hours v1.1 of the IXEG 737 Classic will hit the store and be sent out free of charge to all current customers of the IXEG 737 Classic!
We know this has been a long awaited release, and we're really looking forward to getting it into your hands! It's been a long road, but we're now confident with a lot of the work that has taken place over the last year that we can get back to making more frequent updates again on this product.
Most importantly, here's what to expect in the update:
Added TCAS. Just like in the real airplane, it will show various types of traffic (PROX, TA, RA) and the relative altitude, plus voice callouts and visual aids to avoiding RA traffic. The panel should work as the real one, including TA only, ABV/BLW, STBY, etc.
Improved EGPWS. This is enhanced over 1.0.7 - the modes (1-5) should work a lot more closely to how the real modes work, including submodes (i.e. 4A, 4B). There is also a terrain-look-ahead feature that will alert when approaching terrain higher than the aircraft. New panel, new switches, new TERRAIN ON light. New INOP label for FO´s terrain display.
Opening cargo doors with door annunciators and 3D cargo holds modeled.
Eyebrow windows including selectable sunshade panels (select in preferences menu)
Opening cockpit door
Now showing current active waypoint distance and ETA on EHSI upper corners in MAP and CTR MAP mode
Added increase/decrease map range datarefs
A multitude of fixes to FMS stability and LNAV drawing and performance
Several texture fixes
INOP label for the logo lights if winglets fitted
Autopilot fixes (autothrust gain, logic of MA buttons, GS arm logic, cleanup of FMA modes in some circumstances, FL CHG pitch behaviour in MACH regime with turbulence)
Several rare gizmo crashes fixed for switches and levers
Fixes to headings and bearings shown on FIX INFO and LEGS page (now show correct magnetic tracks)
Ground power not showing anymore when booting in turnaround state
Fixes to default transition altitude not always showing correctly (still just a crude east/west division)
Added realistic way to operate approach speeds on APPROACH page
Added failure flag to altimeter when not electrically powered
Improved EFIS symbology when IRS units not aligned
Fuel gauges now show "lbs" when imperial units are selected
LNAV tracking accuracy improved (no more offset flying)
Ground model improvements when using airplane with XP11 (no full XP11 compatibility yet)
Solved numerous situations that would cause the FMS to produce soft crashes in the Gizmo console
Numerous "ninja fixes" for X-Plane 11 compatibility. This means things may work in X-Plane11, but we do not officially support it and it may not be truly accurate numbers as you would find flight model wise in X-Plane 10. This is just enough to get by and allow your enjoyment in XP 11.
As is always the case, we thank you so very much for being a customer, and for hanging in there with us during this time period. We are confident you will really enjoy this new update!
顶一个阿，，，，，，，，，棒棒滴 真是個好消息 , 令人期待 这个不错，必须顶~~~~~~~~~ 挺好的，期待做点其他的飞机。 期待啊。。。希望能有大的改变 IXEG 733 是個很好的插件.聽到更新很高興.. BaiCaiX 发表于 2017-5-28 22:00
可以入手了，之前 IXEG 说过，盗版太多了，可能不会开发后续插件了。
希望有能力的还是支持一下，不要让用 ...
非常支持这样的观点！ 期待啊 BaiCaiX 发表于 2017-5-28 22:00
可以入手了，之前 IXEG 说过，盗版太多了，可能不会开发后续插件了。
希望有能力的还是支持一下，不要让用 ...
引擎没有反应的问题不知道有没有解决，麻烦测试后告知一下。 jimney 发表于 2017-5-29 00:49
引擎没有反应的问题不知道有没有解决，麻烦测试后告知一下。
官方说仍然不能完美支持XP11
页:
[1]